http://www.block-brick-tile-machine.com/index.php en-US http://www.block-brick-tile-machine.com/read.php?27 admin <admin@yourname.com> Fri, 13 Jan 2012 09:20:49 +0000 http://www.block-brick-tile-machine.com/read.php?27
There are many types of concrete available and the estimated amount of concrete produced worldwide each year about six million cubic meters. Technological advances have quite good permeable types of concrete such as high-strength concrete, asphalt concrete, sprayed concrete, SCC, etc., known
A type of concrete that has recently seen more public exposure called foam concrete. This type of concrete is very different from traditional types of concrete where the weight is generally 1:5 1/3rd of normal concrete.
Foam concrete is usually composed of cement, water and air bubbles trapped in the mixture. The air is usually has a tight control is a special type of foam is introduced into the mixture. This foam has a consistency like shaving foam and the air bubbles are so fine that they are virtually invisible to the naked eye.
More than other types of concrete, to make special arrangements, the raw materials for the production of aerated concrete and a bad mixture, the material on a much smaller force will have a mixture. A major advantage of porous concrete compared to ordinary types of concrete is that it requires no advanced way of healing. Everything to do what you can, properly adjusted, the joint air cure of about 4 to 7 days.
Foam concrete is perhaps the only type of concrete that can be used in the permafrost as the numerous applications of this technology proved successful in Canada.The high air content can affect the material like a sponge, so little can change their shape when the frost to prevent fractures.
Aerated concrete applications are almost unlimited. On many advantageous properties such as high flow without compaction, workability, resistance to freezing and thawing. These functions are only a very good choice in applications such as: reducing the burden of soils, the different types of road under the base charge, base plates for the isolation, the production of prefabricated insulating panels and much more.

Remark: The machines for making foam concrete,please click Foam concrete machines
Tags - foam , concrete,lightweight , block,machines,foamed , concrete ]]> http://www.block-brick-tile-machine.com/read.php?26 admin <admin@yourname.com> Sat, 07 Jan 2012 03:26:31 +0000 http://www.block-brick-tile-machine.com/read.php?26
AAC was also known by its shorter name AAC invented in Europe in the 1920s to meet the needs of the construction industry after the war. A lightweight, prefabricated building that could be produced in large scale proved to be ideal for those times. The material provides a support structure, insulation and fire protection in a single layer.

AAC is composed usually of quartz sand, lime, cement, water and air entraining agent. The difference between ordinary concrete and AAC is that the total size of not more than 2.0 mm. This means that the gravel is not used in their manufacture. The air entraining agent is aluminum powder generally used in amounts generally less than 0.1% by volume.

By mixing the raw materials, various chemical reactions. First, the aluminum powder reacts with calcium chloride and water. This reaction leads to the formation of hydrogen gas which acts as an air entraining agent in the mixture. Since the reaction occurs, more gas is released, thereby increasing their volume, the mixture gradually. Ultimately, the amount of its volume can have up to 5 times increased, as the amount of aluminum powder.
This phase of the manufacturing process ends with the hydrogen replaced by air, and escapes into the atmosphere.

The second reaction occurs much later in the process. After the material is mixed and reaches its maximum volume, which is hard and cut into blocks with a wire. then placed in an autoclave chamber, where the second reaction takes place. At high temperature and pressure in the chamber of calcium hydroxide reacts with silica sand hardened the hydrate form of silica has high calcium crystal structure. This process can achieve up to 12 hours in which the pressure 12 bar, when temperatures can reach 180 degrees Celsius can. After this period, the system is ready for use in the workplace.

The technology for the production of aerated concrete used is very different from that used in the production of AAC block.The only similarity between the two processes are raw materials. In the case of aerated concrete in general are cement, water and a certain type of foam. This last component is the foam, what distinguishes the cost of producing this material, in addition to the very expensive production AAC.

The particular type of foam for the production of aerated concrete is required, a liquid concentrate called foaming agents. It is usually mixed with water to 2.5% to 5% and built into a foam generator for this purpose. The rate of expansion of the middle foam around 08.01 clock, which is the optimum for this application. The resulting foam has a density of only 50 grams per liter, or, in other words, 50 kg per cubic meter. In cement, water and foam mix, the result is a very fluid mix ratio.

The main advantage of AAC is that there are large investments, requires expensive to manufacture. In fact, usually made directly on the site with relatively simple devices, whereas AAC only be performed in facilities built.

Are you interested in machines for making AAC block,please click AAC block machines

Tags - aac,clc,construction,block,building ]]> http://www.block-brick-tile-machine.com/read.php?25 admin <admin@yourname.com> Sat, 07 Jan 2012 03:17:44 +0000 http://www.block-brick-tile-machine.com/read.php?25 CLC (foam concrete) blocks are used for building cottages, wall insulation in multistory buildings and internal partitions.
Also CLC can be produced and poured for floors and roofs on-site. In roofs it can be used because of very good insulating and lightweight. For floors CLC offers faster installation and a less expensive option because of the flowing and self-leveling properties

Can be made in required sizes
Common sizes: 490x240x200/190mm & 490x240x90mm
Ash content up to 35%
Approved by CPWD and MES
Lighter in weight
Most economically suitable for multi-story buildings
Speedier construction
Better insulation
Can be manufactured in density varying from 400 kg/cu.m. to 1,600 kg/cu.m. as per requirement
Savings in cost of structure of multi-story building due to reduction in dead load & less mortar consumption
We can also make them at your work site

Tags - clc,aac,light , weight,block,foam , concrete ]]> http://www.block-brick-tile-machine.com/read.php?24 admin <admin@yourname.com> Mon, 02 Jan 2012 09:09:05 +0000 http://www.block-brick-tile-machine.com/read.php?24
A wet brick and block build is constructed with a block built internal skin and cavity followed by a brick external facing, remain the preferred building method of self-builders. According to the Traditional Housing Bureau (THB), an organisation that promotes brick and block building techniques, around 70 per cent choose this method to construct their property.

Heated discussions over the speed of brick and block construction will be around for years to come - it is often argued that the speed of construction is close between traditional methods and timber frames. This may well be the case if you've started trying to build and not yet ordered a timber frame, but timber if you plan to start once your frame is ready - as most do - a timber frame house will be water tight as much as four to six weeks sooner than a brick and block build.

Changes to thermal efficiency were introduced in April 2002, toughening up the building regulation requirements - an area where timber frame excels but this does not mean that brick and block building has had its day!

Thermal Performance
The solid mass of a brick and block self build allows the absorption of heat, which is radiated into the house. This creates a more stable temperature meaning less heat will be required at night.

Tests have shown brick and block built houses to maintain a temperature between 5°C - 8°C higher than lightweight structures.

Sound Insulation
Further to the thermal performance regulation changes, sound insulation specifications have been increased. It is widely accepted that mass stops noise in the simplest terms. Block work clearly provides a lot more mass over plasterboard and studwork partitions - when plastered the block work provides around 50 per cent greater sound insulation.

Superior sound insulation is provided by concrete floors over that offered by wooden floors, with a comparative reduction of around 47-52dB compared to 30-38dB of a timber floor.

Of course, these increased building specifications are rarely for the benefit of the self builders pocket, but brick and block has the advantage in these stakes. The cost of building either brick and block, or timber frame is now very close.

The interesting and perhaps less obvious advantage is down to the staged payments of a brick and block build. Timber frames have to be paid in full upfront whereas a self builder using brick and block can pay in several installments as and when more bricks are required. This is handy if you are relying on a mortgage that makes stage payments, rather a lump sum - though you must of course ensure your can complete each stage with the bricks you've bought!

If you want to the concrete block machines for making such block,just visit www.ss-machines.com ]]> http://www.block-brick-tile-machine.com/read.php?23 admin <admin@yourname.com> Mon, 02 Jan 2012 03:14:39 +0000 http://www.block-brick-tile-machine.com/read.php?23 AAC wall has an excellent sound Transmission class (STC) ,rating of 44. Result: Virtually Soundproof  Interiors!
2.Thermal Insulation
It has highest thermal rating in the industry….R30! Thus provides well insulated interiors, keeping out warm air in summer and cold air in winters.AAC reduces Air conditioning cost by 30%.
3.Earthquake Resistant
Earthquake forces on structure are proportional to the weight of the building, hence AAC shows excellent resistant to earthquake forces. Regions of high seismic activity like Japan exclusively use AAC blocks. It has been proven to withstand wind loads of category 5 tropical storms.
4.Floor Space Area
Use of thinner blocks (6" instead of 9" exterior walls) because of its excellent water barrier & insulation properties leads to an increase in floor space area between 3-5%.
5.Cost saving
Being lightweight AAC drastically reduces the dead weight of building, resulting into reduction in steel (up to 27%) and cement (up to 20%) structural cost saving.Being 8 times the size of a clay brick, AAC wall construction    involves 1/3 the joints, thus an overall mortar saving up to 66%.
Its automatic manufacturing process gives AAC an exceptional dimensional accuracy & smooth surfaces, eliminating need of three-coat plaster walls and allows for a final 6 mm skim coat (putty/POP).
6.Fire Resistant
Best in class fire rating of 4 hours. The melting point of AAC is over 1600 ºc, more than twice the typical temperature in a building fire of 650 ºc.
7.Pest ResistantTermites hate AAC! Being made of inorganic minerals, it does not promote growth of molds.
8.Water Barrier
Its structure does not allow for capillary action making it impervious to water. Its water barrier properties are further enhanced by adding silicone based additives.
9.High Strength
High pressure steam curing autoclaving process gives AAC unmatchable strength to weight ratio, higher than even M150 concrete and far exceeds the Indian Building code requirements.
10.Energy Efficient
AAC is 100% Green Building Material & is a walling material of choice in LEED certified buildings (ITC centre, the highest rated Green Building has been built using AAC).AAC is most energy & resource efficient in the sense that it uses least amount of energy & material per m³ of product.Unlike brick manufacturing process which uses previous toplayer agricultural soil, AAC uses FlyAsh (65% of its weight), thus provides the most constructive solution to the nation’s flyash utilization problem.
11.The AAC block machinesfor making AAC block.
Tags - aac,block,machines,light,weight,construction ]]> http://www.block-brick-tile-machine.com/read.php?22 admin <admin@yourname.com> Tue, 13 Dec 2011 07:38:08 +0000 http://www.block-brick-tile-machine.com/read.php?22 1. Aerated Autoclaved concrete block (light block ) is the light and porous buidling material. It has light ,keeping temperature ,Environmental protection,can't burn and other advantages.it has a wide prospect of market.it is the main building material in the future. it can be made into many kinds of bricks(for example:600×200×100,80×80×180,240×115×53,600×200×125),
they could be used industry building and common building.they are more and more popular in the world.in the future,they will replace the Clay brick completely.
2.Areated concrete common conception
Common concrete density is usually 1600-2400kg/m3,but Areated concrete are 500kg/m3,600kg/m3,700kg/m3.It has not the big grain,main use silicon material (for example:flyash,sand,stone dust and others ),through making the material small for example sand,they can be used directly if has enough degree of small (for example fly ash.Mixing calcium material lime, cement water to a special slop,then add the aluminum dust and the additive.Make the aluminum dust and the special slop have a Chemical reflect.then produce Hydrogen to make the concrete slop to expanding or swell,foam.Next,put them into the curing room to concreting cutting steaming curing,last,there will bacome the light brick,the porous rate is 70-80%.

Remark: ACC BLOCK MACHINE            
            ACC BLOCK PICTURES
Tags - acc,autoclave, , aerated , ,concrete,light , weight ]]> http://www.block-brick-tile-machine.com/read.php?21 admin <admin@yourname.com> Sun, 11 Dec 2011 05:44:36 +0000 http://www.block-brick-tile-machine.com/read.php?21 cement pipe making machine.
Tags - cement , pipe,rcc,machine,flush,plain,ss ]]> http://www.block-brick-tile-machine.com/read.php?20 admin <admin@yourname.com> Tue, 19 Jul 2011 08:27:09 +0000 http://www.block-brick-tile-machine.com/read.php?20 Our company(www.ss-machines.com) specilizes in the production of block machine for more than ten years china.
In fact,i am also engaged in block machine business for more than four years until 2011.04.Four years is not a long time,
but also not a short time for such business.During this period,i contacted with many cusotmers oversea,mostly from developting countries.
Because our products have a big demand in these countries.After talking with our customers or friends,i find that,the block making machines is still
the new products in such countries,most of the coustomers who are interested in our products,it is the first time to enter this industry.
In order to let the new customer know more about this industry,i setted up an new website www.block-brick-tile-machine.com,this website contains some data about how to making the block,brick,paving,roof tile.Some of the data are original,some are collected from other website.
Hope the visitor who are interested in this industry like my website.


Pourquoi dois-je mettre en place ces site Web deux matériaux de construction?
Notre entreprise (www.ss-machines.com) specilizes dans la production de machines pour le bloc de plus de dix ans en Chine.
En fait, je suis également engagé dans des affaires machine à bloc pour plus de quatre ans jusqu'en années 2011.04.Four n'est pas une longue période,
mais aussi pas un peu de temps pour une telle business.During cette période, j'ai mis en contact avec d'outre-mer cusotmers nombreuses, la plupart de pays developting.
Parce que nos produits ont une forte demande dans ces countries.After parler avec nos clients ou des amis, je trouve que, le bloc des machines est encore
les nouveaux produits dans ces pays, la plupart des coustomers qui sont intéressés à nos produits, c'est la première fois d'entrer dans cette industrie.
Afin de laisser le nouveau client en savoir plus sur cette industrie, je setted en place un nouveau site www.block-briques de tuiles machine.com, ce site contient certaines données sur la façon de faire du bloc, brique, tuile de toit ouvrant,. certaines des données sont originaux, certains sont collectées à partir d'autres sites.
Espoir du visiteur qui sont intéressés par cette industrie, comme mon site.

¿Por qué crear estos sitios web de construcción de dos materiales?
Nuestra empresa (www.ss-machines.com) specilizes en la producción de máquinas de bloques de más de diez años, China.
De hecho, yo también estoy comprometido en el negocio de máquinas de bloques de más de cuatro años hasta el año 2011.04.Four no es mucho tiempo,
pero tampoco es un tiempo corto para business.During este período, me puse en contacto con ultramar cusotmers muchos, la mayoría de los países developting.
Porque nuestros productos tienen una gran demanda en estos countries.After hablar con nuestros clientes y amigos, me parece que, el bloque que hace las máquinas todavía
los nuevos productos en esos países, la mayoría de los coustomers que estén interesados ​​en nuestros productos, es la primera vez para entrar en esta industria.
Con el fin de permitir que el nuevo cliente saber más sobre esta industria, i setted un nuevo sitio web www.block de ladrillo-tile-machine.com, este sitio contiene algunos datos sobre cómo hacer el bloque, ladrillo, pavimento, teja. algunos de los datos originales, algunos son recogidos en otro sitio web.
Esperamos que los visitantes que estén interesados ​​en esta industria al igual que mi sitio web.
Tags - block , machines,brick , machine, , bloque, , ladrillo, , pavimento,bloc, , brique, , tuile , de , toit , ouvrant, , teja ]]> http://www.block-brick-tile-machine.com/read.php?19 admin <admin@yourname.com> Sat, 19 Mar 2011 02:25:33 +0000 http://www.block-brick-tile-machine.com/read.php?19 2Concrete is mixed in accordance with the instruction on a cement pocket.  The colour can be altered by adding oxides to the dry cement component.
3After mixing your concrete correctly, fill the mould and agitate on a hard level surface to remove any air bubbles.  The correct consistency should be that with a little agitation, the concrete will level itself in the mould, ie wet mix.

4Cover with plastic to retain moisture until concrete is set and a fair amount of strength has been attained.  
5Once set, de-mould stone and cure the concrete by keeping stone moist and out of direct sun for 7 days.  The stones can now be laid (unless it is for a driveway in which case, 28 days are needed for the concrete to reach full strength before one can drive on it).  
6Once the stone is de-moulded, the mould can be cleaned and prepared with release oil for the next casting.

]]> http://www.block-brick-tile-machine.com/read.php?18 admin <admin@yourname.com> Tue, 28 Sep 2010 02:01:52 +0000 http://www.block-brick-tile-machine.com/read.php?18 CLC (foam concrete) blocks are used for building cottages, wall insulation in multistory buildings and internal partitions.
Also CLC can be produced and poured for floors and roofs on-site. In roofs it can be used because of very good insulating and lightweight. For floors CLC offers faster installation and a less expensive option because of the flowing and self-leveling properties

Can be made in required sizes
Common sizes: 490x240x200/190mm & 490x240x90mm
Ash content up to 35%
Approved by CPWD and MES
Lighter in weight
Most economically suitable for multi-story buildings
Speedier construction
Better insulation
Can be manufactured in density varying from 400 kg/cu.m. to 1,600 kg/cu.m. as per requirement
Savings in cost of structure of multi-story building due to reduction in dead load & less mortar consumption
We can also make them at your work site

Tags - clc , block,concrete , block ]]>